Home All Updates (36) Page 2 7
Amf panel AT ANKLESHWAR AMF stands for Automatic Start on Main Failure, as these are used for automatically changing over from the main electricity supply to the standby generator in the event of failure of the mains supply. On resumption of the mains supply, the system automatically changes over from generator to mains thereby eliminating the unnecessary load on the generator and turning it off. The range of AMF panels also features interlocked MCBs or pole contactors. www.akhilindustries.com
APFC Panel These panels are used in commercial buildings and industries where there is fluctuation in voltage and power supply. The electrical load required by a unit depends upon the type of machineries, cooling plants and other devices installed. There is always a possibility of damage of these equipments if power fluctuates. In case of fixed loads they can be safeguarded using capacitors, but in case of varied loads, a mechanism to switch in and switch out the capacitors is required which is basically handled using APFC panels.
MCC PANEL Concept Traditional inter wiring replaced by single open device-level network cable Network-ready device in every MCC unit Transportable MCC software for monitoring and documentation System pre-tested and pre-configured before shipment Software provides ultimate window into MCC - Real-time monitoring - Access from anywhere in the facility - Complete documentation and MCC history Device-level products capture new information - Allows predictive maintenance, process monitoring and advanced diagnostics.